380mm Wide Belt Sander Machine Double Sanding Belt for Particle
Wide Belt sanding Function and Characteristics:
(1) It is suitable for calibrating and fine sanding laminate
lumber, composite board, particle board, solid wood, panel
furniture, bamboo floor, wood door and etc. It is one of the
necessary equipment for integrated wood and furniture
(2) R-RP model: The first roller is steel roller; the second unit
is 85°rubber roller with air sanding pad. RP-P model: The first
unit is rubber roller with sanding pad; the second unit is air
Steel roller is for calibration sanding and rubber roller is for
(3) The pressing roller protects device to keep the board on the
feeding table, which keep the operators safe.
(4) Double sanding belt, one time sanding, no need change sanding
Working speed stepless adjusting, easy to adjust and save power.
The machine have an adequate support system to support a long
profile during sending process.
The machine equipped with suitable thickness indicator for easy
process of difference profiles thickness.
Max. working width: 380mm
Working thickness: 140mm
Front standing belt speed: 14m/sec
After sanding belt speed: 14m/sec
Feed speed: 5-19m/min
Sanding belt size: 400X1090mm
Gross power of motor: 13.25kw
First motor: 5.5kw
Second motor: 5.5kw
Lifting motor: 0.75kw
Feeding motor: 1.5kw
Working air pressure: 0.6mpa